There have been a couple of problems with the dbus and amarok recognising the iPhone, so I decided to update and see if there was more to offer on that level. I know that I posted an article about this, and there are a few questions, however, I hope to have the answers soon and have the solution.

Obviously, you are going to have to setup a few packages first, and then emerge some prerequisites before amarok will detect your device. To make things a little easier, I am just going to flow with it, if there are any questions, please post comments and I can explain.

Now is a good time to go ahead and edit your usbmux file. You need to test out and make sure that your iphone is being registered when it connects. First you will have to modify the udev rules so that you can see the output. Increase the syslog debug level by editing “/lib/udev/rules.d/85-usbmuxd.rules” and adding “-v -v” flags to the end of both RUN statements. Now you can run dmesg and see if usbmuxd is seeing your iphone. A reboot might be required for all of the changes to take effect.

After your reboot, check dmesg to make sure that your device is being seen. Then, mount the device, create some required folders, and get your UUID. Since you now have ifuse, you can easily mount your device, but in order to do this, it is required to be in a specific location. Additionally, if you want your users (not root) to also have ifuse privileges, you will need to edit the config files to do that. (This step might not be required anymore, however, I am still doing it just in case).

Now, everything should be good to go. All you need to do now is emerge amarok and test your phone out.

If all goes as planned, your good to go yet again. If you have found that some of the steps are no longer required, please let me know and I will make the changes.

Prerequisite Packages Needed with the Proper USE Flags:

After these are installed, you need to remove both media-sound/amarok and media-sound/amarok-utils. Once these are removed, you need to reinstall both of the newest packages with the following USE flags.

Before the installation, you need to remove the Amarok folders in your home directory. You will have to reconfigure your music collection’s location, but this will clear all of the problems that might stop your phone from mounting in Amarok. (I removed all the folders vice each file inside)

Locations of Amarok Configurations:

…and here are the new Amarok packages you need.

Amarok and Amarok Utilities with Proper USE Flags:

Once you have done all of this, plug your phone in, and it should mount in Amarok automatically.

Screenshot:

Step 1: First, you need add the Rion overlay from layman.

(if you have a PORTDIR_OVERLAY line already, then just add it manually with your favorite editor)

Step 2: You will need to emerge a couple of packages, if you have them installed, it is best to remove them first, then emerge the new ones.

You will need the following packages in order for this to work right. Note that the version DOES matter. If you have older versions, they need to go, but same or later versions are good.

• 1. dev-libs/libusb-1.0.5
• virtual/libusb-1
• 2. app-pda/ifuse-0.9.4
• 3. app-pda/libplist-0.16
• 4. app-pda/libiphone-0.9.4
• 5. app-pda/usbmuxd-1.0.0_rc2

The 9999 packages of any of these really didn’t work for me, so I suggest masking them out.

Additionally, I would make sure that amarok and/or rhythmbox are built with ipod support (USE=”ipod”). Just add the ‘ipod’ use flag to your USE line in /etc/make.conf.

Now, we have to create the usbmux user so that usbmuxd will work properly. You will have to make sure that this user has access to usb and plugdev. I added wheel too, but it isn’t necessary.

Once everything is emerged successfully, you need to test out and make sure that your iphone is being registered when it connects. First you will have to modify the udev rules so that you can see the output. Increase the syslog debug level by editing “/lib/udev/rules.d/85-usbmuxd.rules” and adding “-v -v” flags to the end of both RUN statements. Now you can run the following and see if usbmuxd is seeing your iphone.

If you are seeing your phone come up, then everything was done right. The last thing to do is mount the phone. simply use ifuse, and mount it to a specified mount point.

Again, you can now browse the entire filing system, and when you import the music, it should convert so that it isn’t in the hashed/encrypted form. Rhythmbox even got the album art.

I am working on how to copy music to the iphone now, so if anyone got that down, please let me know.

http://marcansoft.com/blog/2009/10/iphone-syncing-on-linux/

It seems as if there is a project underway to help us linux users get the best out of our iPhones!

Now, you will need to obtain a version of the 2.x firmware, and your device will need to be jailbroken. After you have jailbroken the device, you need to install ‘OpenSSH’ and ‘Mobile Terminal’ from Cydia or Installer. These allow the obvious, ssh access and a terminal on the device.

On your linux box, you will need Amarok 1.4.10 or before, sadly, Amarok 2.0 will not work yet. You will also need sshfs and fuse.

# echo "media-sound/amarok ipod" /etc/portage/package.use
# emerge sys-fs/fuse sshfs-fuse =media-sound/amarok-1.4.10-r2

Set a static ip address on the device to match your the network your linux box is on.

Now, ssh into the device, the root password is defaulted to alpine.

$ ssh root@192.168.1.110

Edit the /etc/ssh/ssh_config on the device, and add the following lines:

iTouch# nano /etc/ssh/ssh_config

RSAAuthentication yes
PubkeyAuthentication yes
AuthorizedKeysFile .ssh/authorized_keys

Next, you need to generate a ssh key for passwordless login into the device, and copy it to the device.

$ ssh-keygen
$ ssh-copy-id -i ~/.ssh/id_rsa.pub root@192.168.1.110

Now to make sure that your permissions are set right for passwordless login:

iTouch # cd ~
iTouch # cp .ssh/authorized_keys .ssh/authorized_keys2
iTouch # chmod 755 /var/root
iTouch # chmod 700 /var/root/.ssh
iTouch # chmod 644 /var/root/.ssh/authorized_keys
iTouch # reboot

After your device has rebooted, test your connection to make sure that you can log into your device without a password.

$ ssh root@192.168.1.110

If all is well, mount the device to your desired directory, or you can use ipod-touch-mount or iphone-mount in Ubuntu.

$ mkdir ~/itouch
$ sshfs root@192.168.1.110:/var/mobile/Media ~/itouch

Next, we have to get and set the Firewire GUID:

$ cd ~/itouch/iPod_Control/Device
$ su
# lsusb -v -d 05ac: | grep iSerial | awk '{print $3}' | cut -b1-16 | xargs printf "FirewireGuid: 0x%s\n" > SysInfo

Reboot the device. Now, before we can continue with syncing and adding music to the device, we have to modify the database version. This will allow libgpod to recognize and sync your device to Amarok. Sadly, I haven’t gotten this to work with RhythmBox or Exile.

We are going to log into the device, and edit the checkpoint.xml file…

$ ssh root@192.168.1.110
iTouch # nano /System/Library/Lockdown/Checkpoint.xml

Search for the DBVersion Key, and change the value from 4 to 2.

iTouch # reboot

The last thing we have to do is add your device to Amarok so that it will populate your music and you can sync your device.

• Launch Amarok, and go to Settings => Configure Amarok…
• Click the ‘Media Devices’ botton at the bottom
• Click ‘Add Device…’
• Select ‘Apple iPod Media Device’
• Name your Device
• The mount point should be ‘/home/$USER/itouch’ (unless you are using ipod-touch-mount, then it is /media/ipod)
• Click Ok, and your are all set. Once you are in Amarok, just go to the devices tab on the bottom left (printed sideways) and click the ‘Connect’ button on your device and your music will populate in that device window. You can drag and drop your music into that device from your Amarok music collection as well.